Calculadora de Plafón Gratis
Calcula los paneles y materiales necesarios para un techo de plafón. Ingresa las dimensiones de la habitación.
Tiles Needed (2x2)
120 tiles
Tiles Needed (2x2) vs Room Length
Fórmula
## How to Estimate a Drop Ceiling ### Material Counts **Tiles (2x2) = ceil(Length / 2) x ceil(Width / 2)** **Hanger Wires = ceil(Length / 4) x ceil(Width / 4)** **Wire Length = Drop Distance + 12 inches (for wrapping around the joist and through the runner)** Hanger wires are spaced every 4 feet along each main runner. Each wire needs to be long enough to span the drop distance plus about 12 inches extra for attachment loops at both ends.
Ejemplo Resuelto
A 24 x 20 foot basement room with 2x2 tiles at $2.50 each and a 6-inch drop.
- 01Area = 24 x 20 = 480 sq ft
- 02Tiles = ceil(24/2) x ceil(20/2) = 12 x 10 = 120 tiles
- 03Tile cost = 120 x $2.50 = $300.00
- 04Hanger wires = ceil(24/4) x ceil(20/4) = 6 x 5 = 30 wires
- 05Each wire = 6 + 12 = 18 inches long
Preguntas Frecuentes
Can I install a drop ceiling in a basement with low ceilings?
You need a minimum of about 7 feet 6 inches of finished ceiling height for a habitable room. The grid requires at least 3-4 inches of clearance below any obstruction, so plan the drop distance carefully.
How do I cut ceiling tiles?
Most ceiling tiles can be scored with a utility knife and snapped. For cleaner cuts, use a sharp utility knife with a straightedge, cutting face-up on a flat surface. Mineral fiber tiles may produce dust so wear a mask.
Do I need to buy extra tiles?
Buy 5-10% extra tiles for cutting waste around the edges and to have replacements on hand if a tile is damaged or stained in the future.
Aprender