Kostenloser Concrete Mix Ratio Rechner
Berechnen Sie cement bags, sand, and aggregate quantities for concrete aus mix ratio und volume. Supports M15, M20, M25.
Cement (50 kg bags)
6.3 bags
Cement (50 kg bags) vs Concrete Volume Needed
Formel
## Concrete Mix Design by Ratio A mix ratio specifies the proportional volumes of cement : sand : aggregate. ### Method 1. Dry volume = Wet volume x 1.54 (factor accounts for voids and compaction) 2. Divide dry volume by sum of ratio parts 3. Multiply each ratio part by the unit volume 4. Convert cement volume to bags: volume x 1440 kg/m^3 (bulk density) / 50 kg per bag Common ratios: 1:2:4 for M15 (general purpose), 1:1.5:3 for M20 (structural), 1:1:2 for M25 (high strength).
Lösungsbeispiel
1 m^3 of concrete at 1:2:4 ratio.
- 01Dry volume = 1 x 1.54 = 1.54 m^3
- 02Total parts = 1 + 2 + 4 = 7
- 03Cement = 1.54 x 1/7 = 0.220 m^3 = 0.220 x 1440 = 316.8 kg = 6.3 bags
- 04Sand = 1.54 x 2/7 = 0.440 m^3
- 05Aggregate = 1.54 x 4/7 = 0.880 m^3
Häufig Gestellte Fragen
What does the 1.54 dry volume factor mean?
When dry materials are mixed with water and compacted, the volume reduces because water fills air voids. To get 1 m^3 of wet concrete, you need approximately 1.54 m^3 of dry bulk ingredients.
What ratio gives what strength?
1:3:6 gives about M10 (10 MPa). 1:2:4 gives about M15. 1:1.5:3 gives about M20. 1:1:2 gives about M25. These are nominal mixes; designed mixes with specific water/cement ratios give more precise strengths.
How much water do I add?
The water-cement ratio (w/c) typically ranges from 0.40 to 0.60. For M20 concrete, w/c of about 0.50 is common. Too much water weakens concrete; too little makes it unworkable. Add water gradually.
Lernen