Calcolatrice Modulo di Resistenza Gratuita
Calcola il modulo di resistenza elastico e plastico di una sezione.
Elastic Section Modulus Sxx
666,667 mm^3
Elastic Section Modulus Sxx vs Width (b)
Formula
Section Modulus of a Rectangle
Section modulus links bending moment to bending stress directly.
Elastic Section Modulus
S = b h^2 / 6
Derived from S = I / c where I = b h^3 / 12 and c = h / 2.
Plastic Section Modulus
Z = b h^2 / 4
Z represents the full plastic capacity when the entire cross-section has yielded. The ratio Z/S is called the shape factor; for a rectangle it is always 1.5.
Esempio Risolto
A 100 mm x 200 mm rectangular section.
- 01Sxx = 100 x 200^2 / 6 = 100 x 40000 / 6 = 666,667 mm^3
- 02Zxx = 100 x 200^2 / 4 = 100 x 40000 / 4 = 1,000,000 mm^3
- 03Shape factor = 1,000,000 / 666,667 = 1.5
Domande Frequenti
When do I use elastic vs plastic section modulus?
Use the elastic modulus S for allowable-stress (working-stress) design. Use the plastic modulus Z for limit-state (LRFD) design where plastic redistribution is permitted.
What is the shape factor for other sections?
For a solid circle the shape factor is about 1.70. For standard I-beams it ranges from 1.10 to 1.20. Higher shape factors mean more reserve capacity beyond first yield.
How do I find section modulus for standard steel shapes?
Steel manufacturers publish section property tables that list S and Z for every rolled shape. Check the AISC Manual or equivalent regional standards.
Impara