Calculateur de Faux Plafond Gratuit
Planifiez votre installation de faux plafond suspendu. Calculez le nombre de dalles, profilés et accessoires nécessaires.
Tiles Needed (2x2)
120 tiles
Tiles Needed (2x2) vs Room Length
Formule
How to Estimate a Drop Ceiling
Material Counts
Tiles (2x2) = ceil(Length / 2) x ceil(Width / 2)
Hanger Wires = ceil(Length / 4) x ceil(Width / 4)
Wire Length = Drop Distance + 12 inches (for wrapping around the joist and through the runner)
Hanger wires are spaced every 4 feet along each main runner. Each wire needs to be long enough to span the drop distance plus about 12 inches extra for attachment loops at both ends.
Exemple Résolu
A 24 x 20 foot basement room with 2x2 tiles at $2.50 each and a 6-inch drop.
- 01Area = 24 x 20 = 480 sq ft
- 02Tiles = ceil(24/2) x ceil(20/2) = 12 x 10 = 120 tiles
- 03Tile cost = 120 x $2.50 = $300.00
- 04Hanger wires = ceil(24/4) x ceil(20/4) = 6 x 5 = 30 wires
- 05Each wire = 6 + 12 = 18 inches long
Questions Fréquentes
Can I install a drop ceiling in a basement with low ceilings?
You need a minimum of about 7 feet 6 inches of finished ceiling height for a habitable room. The grid requires at least 3-4 inches of clearance below any obstruction, so plan the drop distance carefully.
How do I cut ceiling tiles?
Most ceiling tiles can be scored with a utility knife and snapped. For cleaner cuts, use a sharp utility knife with a straightedge, cutting face-up on a flat surface. Mineral fiber tiles may produce dust so wear a mask.
Do I need to buy extra tiles?
Buy 5-10% extra tiles for cutting waste around the edges and to have replacements on hand if a tile is damaged or stained in the future.
Apprendre