Calculadora de Moldura de Teto Grátis
Calcule a metragem de moldura de teto (sanca) necessária para o seu cômodo. Planeje a compra com precisão.
Total with Waste
64.4 ft
Total with Waste vs Room Length
Formula
## How to Calculate Crown Molding ### Formula **Total Material = Perimeter x (1 + Waste %)** Crown molding runs along the ceiling-wall junction all the way around the room. Unlike baseboard, there are no door openings to subtract. However, crown molding cuts generate more waste because compound miter cuts at corners consume extra material. ### Waste Guidelines - Simple rectangular rooms: 10-15% - Rooms with many corners or alcoves: 15-20% - First-time installers: 20% (practice cuts needed)
Exemplo Resolvido
A 16 x 12 foot room with 4 inside corners, no outside corners, and 15% waste.
- 01Perimeter = 2 x (16 + 12) = 56 ft
- 02Total with 15% waste = 56 x 1.15 = 64.4 ft
- 03Pieces needed = ceil(64.4 / 12) = 6 twelve-foot pieces
- 04Corner joints = 4 inside + 0 outside = 4 joints
Perguntas Frequentes
Should I cope or miter inside corners?
Coped joints are preferred for inside corners. A coped joint consists of one piece butted into the corner and the second piece cut along its profile to fit over the first. Coped joints stay tight even as the wood expands and contracts.
What angle do I cut crown molding?
Standard crown molding sits at a 38-degree spring angle against the wall. For 90-degree inside corners, set your miter saw to 31.6 degrees miter and 33.9 degrees bevel, or use a compound miter chart for your specific profile.
Do I need crown molding in closets?
Crown molding in closets is optional and typically omitted. Most homeowners install it only in visible living spaces, bedrooms, and hallways.
Aprender