轴承载荷计算器 — 公式
## Bearing Pressure
Bearing pressure is the compressive contact stress between two surfaces, such as a beam sitting on a support plate.
### Formula
**sigma_b = F / A_bearing**
where F is the applied force and A_bearing is the contact area. This must not exceed the allowable bearing stress of the weaker material. For steel on concrete, allowable bearing is typically 0.85 f'c (concrete strength) multiplied by area modification factors.
Bearing pressure is the compressive contact stress between two surfaces, such as a beam sitting on a support plate.
### Formula
**sigma_b = F / A_bearing**
where F is the applied force and A_bearing is the contact area. This must not exceed the allowable bearing stress of the weaker material. For steel on concrete, allowable bearing is typically 0.85 f'c (concrete strength) multiplied by area modification factors.
计算示例
An 80 kN beam reaction on a 100 mm x 40 mm bearing plate.
- Bearing area = 100 x 40 = 4000 mm^2
- F = 80 kN = 80,000 N
- sigma_b = 80,000 / 4,000 = 20 MPa