免费焊缝长度计算器
计算钢结构连接所需的焊缝长度。
lbs
in
psi
Minimum Weld Length
0.00 in
Effective Throat0.177 in
Capacity per Inch3,712 lbs/in
Minimum Weld Length vs Applied Load
公式
## Fillet Weld Length **L = P / (t x Fv)** Where P is the applied load, t is the effective throat (0.707 x leg size for a 45-degree fillet), and Fv is the allowable shear stress on the weld metal. For E70 electrodes, Fv = 0.30 x 70,000 = 21,000 psi.
计算示例
10,000 lb load, 1/4-inch fillet weld, E70 electrode.
- 01Throat = 0.25 x 0.707 = 0.177 in
- 02Capacity = 0.177 x 21,000 = 3,713 lbs/in
- 03Min length = 10,000 / 3,713 = 2.69 in
- 04Use at least 3 inches of weld.
常见问题
What does 0.707 represent?
For a 45-degree fillet weld, the shortest distance through the weld (the throat) is the leg size multiplied by sin(45) = 0.707. The throat is the weakest cross-section.
What is the minimum weld length?
The AISC requires minimum weld length of 4 times the weld size or 1.5 inches, whichever is greater. Very short welds may not develop full strength due to start/stop effects.
学习